About Us

How it all started.

Founded in 1977 as a mold-maker and supplier to the marble industry in a borrowed 900 square foot section of a cultured marble facility, American Acrylic and Injection, Inc. has since grown rapidly. We are now one of the largest suppliers of acrylic bathtubs in the United States. Now operating in a combined 100,000 square foot building in Farmersville, Texas. In the 1980’s a relatively new type of bathtub was making its way into U.S. households. A quality acrylic surface backed by fiberglass was proving to be an excellent, cost-effective solution to gel-coated fiberglass and marble tubs. Our ability to produce our own molds combined with our experience in fiberglass and vacuum-forming production, resulted in a natural fit for our new product line: the acrylic/fiberglass tub. In 1991 we began injection-molding all plastic components for our whirlpool bathtubs. We are the only US-based bathtub manufacturer currently producing both our tubs and whirlpool systems in-house. In 2000 we began production of quality acrylic/fiberglass shower pans. In 2004 we made air massage systems available for all of the bathtubs we sold. Today we carry a full line of acrylic bathtubs, acrylic shower pans, whirlpool systems, shower drains, LED lighting, and air massage systems. Our acrylic bathtubs feature eco-friendly components and are built to the highest quality standard. Our whirlpool and air massage system bathtubs are built to both the Acrylic and Marble Industies’ standards, and come with the best warranty available. With over 1 million units sold we are confident that you will be pleased with our products.

Toll Free: 1-800-666-7961

419 Welch Drive
Farmersville, Texas 75442-3415
Office Hours: Monday thru Friday, 8am-3:30pm, Central Time
Local: 972-784-7759
Fax: 972-782-7420
Email: sales@bathtubs.com

Reach Out

4 + 15 =

Bathtubs by Type

FREE SHIPPING TO THE LOWER 48.

Free Standing Tubs

Drop-In Tubs

Skirted Tubs

Showerpans by type

FREE SHIPPING TO THE LOWER 48.

Accesories

FREE SHIPPING TO THE LOWER 48.

Welcome to bathtubs.com, your online bathtub superstore.

We offer high-quality acrylic bathtubs with many standard features and upgrades our competitors don’t. All of our bathtubs are available as Soaker Tubs (without jets), whirlpool tubs, Air massage tubs, Vibrosonic or a combination. All bathtubs are available in a variety of colors. All replacement and upgrade parts for our tubs are in stock. Relax and browse through our complete internet selection. If you have any questions please call or email our friendly office in Farmersville, Texas. Free shipping to the lower 48. Sales Tax of 8.25% will apply to Texas residents.

Learning Center

Air Jet Bathtub: An air jet bathtub is the general description of a bathtub built with bubble-making air jets. Each jet contains a check valve to insure no water is allowed into the air line feeding the jet. Each jet has anti-microbial hose to insure no bacteria growth. The system comes with an air blower that automatically heats the air to 145 degrees to keep your bath water from cooling off and allowing a more comfortable and longer air therapy session. The jet configuration for air massage systems will contain 16 jets. Air massage system requires a 20Amp GFCI dedicated circuit and an access panel.

American Aqua Heat System: The most unique heater for your whirlpool bathtub on the market today. This is a hollow jacket that fits directly over the whirlpool motor, as the water is being circulated through the pump and being transferred back through the Hydro-therapy jets in the bathtub, it is taking the heat from the 48 frame motor and transferring it back into the bath water. There is absolutely no electricty needed for our Aqua-Heat transfer jacket. It will actually raise the water temperature by .2 degrees every 10 minutes with the air control closed. It also has the ability to lower the temperature of the motor allowing the motor to have a considerably longer life thus allowing bathtubs.com to extend the warranty of the motor from the manufacturers original 1 year warranty to a full 2 year warranty. Whirlpool system requires a 20Amp GFCI dedicated circuit and an access panel.

Anti-Microbial: Many of our products contain anti-microbial additives which is a substance that kills or inhibits the growth of microbes such as bacteria, fungi, or viruses. Anti-Microbials are substances that are incorporated into the manufacturing process when the plastic parts are made. The bathtub surface is anti-microbial as well as the air and water jet components and external piping. All normal cleaning procedures should still be followed. Clean-Fill: Each whirlpooled bathtub comes with a port for the ease of adding our Clean*Way product, which insures all internal components of the whirlpool system including the pump can be kept free of bacteria. Clean*Way: Clean*Way is a natural, environmentally-friendly citrus solvent that dissolves the build up of body and bath oils, dirt, hair, soap scum, rust, and mineral deposits, which are a perfect breeding ground for bacteria and mold. Clean*Way also works great for all sanitary surfaces – showers, vanity tops, sinks, kitchen countertops, tile, toilets, and your new bathtub. LED Lighting: A unique lighting system we developed for custom bathtubs. The colored lights create an upscale atmosphere for your relaxing bath. The colors can change or be set to one color. Contact us for installation information. Combination Bathtub: A combination bathtub is built with a combination of air, water jets, or Vibrosonic. A combination tub is great for different options in bathing: You can enjoy the stimulation of the air jet bubbles or relax and enjoy the therapeutic massage of the water jets. Combination tubs have recently become a very popular new trend. Each system requires a 20Amp GFCI dedicated circuit and an access panel. Safety Suction Valve: This valve was designed to lessen or eliminate hair entrapment in whirlpool bathtub systems. As standard equipment on all American Acrylic tubs, this valve is a valuable feature to help ensure your loved ones are safe. A simple spring-driven plunger will open and introduce air into your whirlpool pump. The pump will de-prime, allowing hair or other obstruction to be easily removed. Once the pressure on the system returns to normal operation, the whirlpool system will continue. Note: No device can guarantee complete safety. Children should only us a whirlpool bathtub with proper supervision. Soaker Bathtub: A soaker tub is a basic bathtub without air jets or whirlpool jets. Whirlpool Bathtub: A whirlpool bathtub is the general description of a bathtub built with therapeutic water jets. Each whirlpool bathtub will come with 8 whirlpool jets and a 1HP pump. We plumb our whirlpool tubs with ainti-microbial flexible piping. They are self draining. As with the surface of your tub the piping system needs to be cleaned regurally to prevent buildup. Trim options are standard color matched plastic,  chrome, brushed nickel, and venetian bronze (also known as oil rubbed bronze). All of our whirlpool system components are manufactured directly by us in Farmersville, Texas. Trim colors are not guranteed to match other manufactures. Jet location can be seen by selecting the whirlpool option on the tub you are interested in. Whirlpool system requires a 20Amp GFCI dedicated circuit and an access panel.
  1. Before initial operation of your new American System take a few minutes to read instructions on its operations.
  2. Never allow the whirlpool system to run without sufficient water in the tub. The pump is designed to be cooled by the water. Continued operation without water could damage seal or impeller.
  3. Never allow small children in the bathtub without proper supervision.
  4. Don’t place small articles in the bathtub that could possibly enter into the jets or suction area.
  5. If your system is operated by a timer or wall switch always set timer or switch while out of the bathtub.
  6. If your system is operated by an air switch it can be turned on or off at any time while in the bathtub.
  7. Make sure the eyeballs of all jets are turned in a downward position.
  8. Do not add bubble bath, soaps, or oils to the water.
  9. While in the bathtub you may start making the necessary adjustments for the most comforting and relaxing bathing experience:
    • Adjust the eyeball for the directional flow that most suits you.
    • By adjusting the Air Control(s) you can determine your own air and water mixture. The Air Control closed all the way will eliminate air from your jets. Open your control(s) a slight turn at a time until the suitable massage action is determined.
  10. Be careful not to overdo your stay in the bathtub.

To properly clean an acrylic bathtub it is recommended to wipe the surface with a damp cloth or sponge using, Clean*Way, household soap or liquid detergent. Stubborn dirt or stains may be removed using Spic & Span in powder form or equivalents. DO NOT use any cleaning products containing abrasive or solvents since these could dull the brilliant surface or cause crazing. Products like Bon-Ami, Comet, Ajax, Scrubbing Bubbles, Lysol, or Windex are not recommended. Harsh chemicals  with any alcohol, amonia, or acid content should never be used on acrylic surfaces which can cause crazing. Avoid using aerosol products on the bath surface.

Whirlpool Systems: It is necessary to regularly clean your American Acrylic Whirlpool System. Normal cleaning should be performed once a month. Even though most of our products, (including the external piping), contain built in anti-microbial additives, we suggest cleaning the piping of the system.

Fill your bathtub with warm water.

  1. Add 1 cup of Clean*Way which can be purchased directly off this website.
  2. Turn your system on and allow it to run for about 10 minutes.
  3. Drain bathtub.
  4. Fill your tub once again with water and allow your system to run another 10 minutes, purging all soap from the lines.
  5. Drain tub. You should now have a clean and sanitary whirlpool system.
These instructions are based on experience with American Acrylic & Injection, Inc. products only. Instructions for other manufacturer’s products is specifically disclaimed. These suggestions are based on information believed to be reliable, however American Acrylic makes no warranty, guarantee, or representation as to the absolute correctness or sufficiency of any of the foregoing, or that additional measures may not be required under particular conditions or circumstances.

All products need to be tested for proper drainage and/or leaks prior to final installation by your installer.

Download Trouble Guide

Installation should be performed by a licensed contractor. 

All products need to be tested for proper drainage and/or leaks prior to final installation by your installer.
Whirlpool system, Air massage system, or vibrosonic system requires a 20Amp GFCI dedicated circuit and an access panel.

To all original purchasers of its products, American Acrylic & Injections, Inc., 419 Welch Drive, Farmersville, TX 75442, warrants its motors free from defects in material and workmanship for a period of two years and limited life time warranty on the pump and whirlpool components. Products which fail or become defective during the warranty period, except as a result of freezing, accident, negligence, improper installation, use, or care, shall be repaired or replaced at our option, without charge within 90 days of receipt of defective products, barring unforeseen delays. American Acrylic & Injection, Inc. shall not be responsible for cartage, removal, and/or re-installation labor, or any other such costs incurred in obtaining warranty replacements. Some states do not allow a limitation on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Pump: American Acrylic & Injection, Inc. is not responsible for loss of the system or inconvenience, loss or damage to personal property or their consequential damage. American Acrylic & Injection, Inc. extends a limited lifetime warranty to all original purchasers of its pumps that they are free from defects in materials and workmanship. Note: Alteration of pump location voids warranty. The limited lifetime warranty applies only on the plastic pump as manufactured by American Acrylic & Injection, Inc. and specifically excludes all components and/or parts which are accessories therein. The motor/air switch is warranted for a period of two (2) years by the manufacturer to the original purchaser from the date of purchase. Products which fail or become defective during warranty period shall be repaired or replaced at our option without charge and within 60 days of receipt of the defective product. In case of removal or replacements, the purchaser assumes the responsibility for labor expenses for service, removal, and re-installation; unless a service labor agreement exists between the purchaser and dealer. The warranties made above are only warranties on the separate components of the system. Improper or negligent installation of your tub with the plumbing, electrical hook-up connections, or alterations or modifications to the system are not covered by any warranty, expressed or implied. This is the only expressed or implied warranty given by American Acrylic & Injection, Inc. To obtain warranty replacements or repair, defective products should be returned, transportation paid, to the place of purchase, or to American Acrylic & Injection, Inc. BATHTUB WARRANTY BATHTUBS PURCHASED AS FACTORY SECONDS OR SURPLUS ARE SOLD “AS IS” WITH NO WARRANTY We warranty to the original purchaser and the original user for a time of 2 years with original Proof of Purchase that our bathtubs
  1. Will be free from manufacturing defects
  2. Will not chip, blister or delaminate
Our liability is limited only to repair or replacement of the product at the point of original purchase F.O.B. Factory. We shall not be held liable for any installation cost, labor or damage incurred from removal or reinstallation. This warranty does not apply to products installed in commercial properties (rental properties, motels, hotels, etc.) This warranty does not apply to whirlpool units or any damage relating to installation of the whirlpool system. Your whirlpool system should be covered under a separate warranty.

All whirlpool and Air massage bathtubs are fully water tested for leaks before leaving the factory. 

This warranty will not apply if:
  1. Tub is not installed according to our instructions or not installed according to local building codes and ordinances.
  2. If moved from original point of installation.
  3. If proper care and customary cleaning instructions are not followed.
  4. If bathtub is subjected to abuse, mishandling or accident.
  5. Not warranted outside the United States.
RETURNED ITEMS Customer is responsible for return freight. All returns must be returned in original factory packaging.  All non-warranty returns are subject to a 15% re-stock fee.
Are you a re-seller of bathtubs? No. We manufacture all of our acrylic bathtubs and jets in Farmersville, TX. How soon will I receive my bathtub? We use LTL for all deliveries. Delivery times vary, but you should receive your bathtub in 3 to 5 days. I’m a builder. Can I receive a discount for ordering in bulk? Yes. Call us for details. 1-800-666-7961. I’m a homeowner. How do I find someone who can install your custom bathtub? Give us a call. We have a large list of recommended installers who are familiar with our product.

Login

Register

A password will be sent to your email address.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Who we are

Our website address is: https://bathtubs.com.

What personal data we collect and why we collect it

Comments

When visitors leave comments on the site we collect the data shown in the comments form, and also the visitor’s IP address and browser user agent string to help spam detection.

An anonymized string created from your email address (also called a hash) may be provided to the Gravatar service to see if you are using it. The Gravatar service privacy policy is available here: https://automattic.com/privacy/. After approval of your comment, your profile picture is visible to the public in the context of your comment.

Media

If you upload images to the website, you should avoid uploading images with embedded location data (EXIF GPS) included. Visitors to the website can download and extract any location data from images on the website.

Contact forms

Cookies

If you leave a comment on our site you may opt-in to saving your name, email address and website in cookies. These are for your convenience so that you do not have to fill in your details again when you leave another comment. These cookies will last for one year.

If you have an account and you log in to this site, we will set a temporary cookie to determine if your browser accepts cookies. This cookie contains no personal data and is discarded when you close your browser.

When you log in, we will also set up several cookies to save your login information and your screen display choices. Login cookies last for two days, and screen options cookies last for a year. If you select “Remember Me”, your login will persist for two weeks. If you log out of your account, the login cookies will be removed.

If you edit or publish an article, an additional cookie will be saved in your browser. This cookie includes no personal data and simply indicates the post ID of the article you just edited. It expires after 1 day.

Embedded content from other websites

Articles on this site may include embedded content (e.g. videos, images, articles, etc.). Embedded content from other websites behaves in the exact same way as if the visitor has visited the other website.

These websites may collect data about you, use cookies, embed additional third-party tracking, and monitor your interaction with that embedded content, including tracking your interaction with the embedded content if you have an account and are logged in to that website.

Analytics

Who we share your data with

How long we retain your data

If you leave a comment, the comment and its metadata are retained indefinitely. This is so we can recognize and approve any follow-up comments automatically instead of holding them in a moderation queue.

For users that register on our website (if any), we also store the personal information they provide in their user profile. All users can see, edit, or delete their personal information at any time (except they cannot change their username). Website administrators can also see and edit that information.

What rights you have over your data

If you have an account on this site, or have left comments, you can request to receive an exported file of the personal data we hold about you, including any data you have provided to us. You can also request that we erase any personal data we hold about you. This does not include any data we are obliged to keep for administrative, legal, or security purposes.

Where we send your data

Visitor comments may be checked through an automated spam detection service.

Your contact information

Additional information

How we protect your data

What data breach procedures we have in place

What third parties we receive data from

What automated decision making and/or profiling we do with user data

Industry regulatory disclosure requirements

Plugin: Defender Pro

Third parties

This site may be using WPMU DEV third-party cloud storage to store backups of its audit logs where personal information is collected.

Additional data

This site creates and stores an activity log that capture the IP address, username, email address and tracks user activity (like when a user makes a comment). Information will be stored locally for 30 days and remotely for 1 year. Information on remote logs cannot be cleared for security purposes.

This is the WPForms preview page. All your form previews will be handled on this page.

The page is set to private, so it is not publicly accessible. Please do not delete this page 🙂 .