Go Green with our non-electric Heat Transfer Jacket
This pump comes in 3 different sizes:
- 3/4 Horse Power will run 4 to 8 Jets
- 1 Horse Power will run 8 to 10 Jets
- 1.5 Horse Power will run 10 to 12 Jets
This bathtub pump comes with standard 1.5″ Unions to be used on most standard whirlpool systems. Your current unions should fit this pump, but in case they don’t, you will simply need to cut the existing ones off and put on the ones that come with this bathtub pump and motor. You will need to check your bathtub first to make sure you have 1.5″ hose going from your suction on bathtub to your current bathtub pump and motor. This can be flexible hose or rigid PVC pipe. This bathtub pump does come with our Aqua Heat Transfer Jacket which will maintain the temperature of the water that is originally put in the bathtub. It also prolongs the life of the motor because it cools your motor at the same time.
All bathtub pumps must be installed according to local electrical codes. If you have any questions before installation have your plumber or contractor call us for Technical Assistance.
The Pump comes with a Limited Lifetime Warranty
Bathtub pump with Water Heater Jacket
GO GREEN with this pump and non-electric heat jacket
Motor warranty: 2 years from date of purchase. Customer is responsible for shipping warranty motor back for repair.
We do not sell the motor or pump separately. Due to our UL certification all work on motors must be performed by American Acrylic.